Specification

Technical Information
Fixture*:
Basin area 13″ (330 mm) x 12″ (305 mm)
Water depth 4-3/8″ (111 mm)
Drain hole Ø 1-3/4″ (44 mm)
*Approximate measurements for comparison only.
Included components:
Cut-out template 115887-7
Installation Notes
Install this product according to the installation guide.
Product does not have overflow.
Spout must be a minimum of 5″ (127 mm) long for adequate
clearance into the bathroom sink when installed with the
centerline as shown.
Spout must be tall enough to clear the 3″ (76 mm) rim height
and provide a 1″ (25 mm) air gap per ASME A112.1.2.
Will comply with ADA when installed per Section 606
Lavatories of the Act.
Will comply with CSA B651 when installed per Clause 4.3.3
of the standard.
Will comply with OBC when installed per Clause 3.8.3.11.
Standard Installation
Recommended ADA Installation for
Drop-In Only (Not with Iron Bracket Hanger)
9-3/4"
(248 mm)
27"
(686 mm)
Min
6-3/8"
(162 mm)
1/2"
(13 mm)
18" (457 mm)
9"
(229 mm)
9"
(229 mm)
9"
(229 mm)
Min
34"
(864 mm)
11"
(279 mm)
2"
(51 mm)
24" (610 mm)
9-3/4"
(248 mm)
8"
(203 mm)
8" (203 mm)
Min
16"
(406 mm)
L Of Fitting
C
ADA Drain Outlet
3"
(76 mm)
1-1/2"
(38 mm)
10-1/4"
(260 mm)
14"
(356 mm)
1-1/4" OD
3/8" Cold
3/8" Hot
4" (102 mm)
Product Diagram
IRON BELL
®
IRON BELL
®
VESSELS BATHROOM SINK
Page2of2
115887-4-
DG