Installation Guide

3. Position the Legs
IMPORTANT! Perform the following steps with another person.
With help, carefully hang and support the sink on the hanger
bolts, and partially thread the cap nuts and washers.
Verify that the sink is level.
Carefully tilt the front of the sink upward, and move the leg
assembly into place under the sink.
Slowly lower the front of the sink, and insert the leg bushings
into the sink corner holes.
Level the side rails, and visually plumb the legs front to back and
side to side.
Use a pencil to trace around the escutcheons.
Mark the leg locations on the finished floor.
Move the leg assembly to a protected location.
Kohler Co. 7 1312546-2-B