Installation Guide

2. Assemble the Legs
NOTE: The side rails and towel bar are designed to slide in and out
for easy length adjustment.
IMPORTANT! Make sure that the O-rings in the legs firmly engage
the side rails and towel bar.
Disassemble the wall brackets from the escutcheons. Set the wall
brackets aside until needed.
Insert the towel bar into the side holes in the legs until it engages
the leg O-rings.
Insert the side rails into the back holes in the legs until they
engage the leg O-rings.
Start the setscrews into the escutcheons.
Insert the escutcheons onto the side rails until the O-rings engage
the side rails.
Turn the levelers into the legs as far as they will go.
Turn the leg assembly upside down, and fit the leg bushings into
the sink corner holes. Adjust the length of the towel bar as
needed.
Adjust the length of the side rails so the escutcheons are flat
against the finished wall.
NOTE: The leg assembly will feel loose at this point. This is
normal, and the leg assembly will be secured when completely
installed.
Kohler Co. 5 1312546-2-B