Installation Guide

3. Install Square Legs to the Frame
NOTE: When installing leather encased legs (42″ (1067 mm) models
only), the side of the leg with the seam should face the wall. Leather
encased legs are not interchangeable.
Install one leg. Make sure the protrusions face the wall and the
mounting position of the second leg. Tighten the bolts.
Install the long towel bar (front side) to the leg by sliding the end
of the towel bar onto a leg bracket. Position the second leg and
attach the towel bar. Install and tighten the bolts.
NOTE: The left and right towel bars will be attached during the
final frame installation.
Left Leg
Right Leg
42" (1067 mm)
Frame
Towel Bar
Protrusion
Leg Bracket
Towel Bar
Bolt
Seam
Kohler Co. 5 1020589-2-B