Rough-In Guide

Product Information
Applicable product:
Under-mount kitchen sink K-3339
Under-mount bar sink K-14301
Fixture*:
Bowl area Ø 11-1/2″ (292 mm)
Water depth 5-1/4″ (133 mm)
Drain hole Ø 3-5/8″ (92 mm)
*Approximate measurements for comparison only.
Included components:
Hardware kit 91915
Cut-out template 111578-7
Installation Notes
Install this product according to the installation guide.
Allow a minimum of 2″ (51 mm) clearance around sink rim for
clip attachment.
Fixture conforms to ASME Standard A112.19.3/CSA B45.4. All
dimensions are nominal.
Ø 13-5/8"
(346 mm)
1-1/2" OD
Countertop
Sink
Clip
1/4" (6 mm)
2" (51 mm)
Min
5-1/2"
(140 mm)
10-7/8"
(276 mm)
6-13/16"
(173 mm)
1-1/8"
(29 mm)
Roughing-In
K-3339, K-14301
UNDERTONE
TM
UNDER-MOUNT SINK
UNDERTONETM UNDER-MOUNT SINK
111162-1-
BD