Installation Guide

2. Secure the Cabinet
Pilot Hole
Screw
Finished Wall
Leveler
NOTE: When possible, secure the cabinet directly to wall studs. If wall studs are not available, use the provided anchors.
With assistance, lift and place the cabinet in position against the nished wall. Do not slide or side-load the legs.
Verify that the cabinet is level and plumb against the wall. If necessary, turn the levelers to adjust the unit.
Verify that there is proper clearance for the doors to open fully.
If using the wall anchors, drill 5/16" holes into the wall and install the anchors.
From inside the cabinet, drill two 1/8" holes into the back of the cabinet aligned with the wall studs or wall anchors.
Secure the back of the cabinet to the wall using the two wood screws provided.
1384738-2-A
4 Kohler Co.