Specification

Features

•

18-gauge stainless steel

•

Single compartment

•

Undercounter

•

Includes installation hardware

•

Rounded bowl(s)

•

34-3/8″ (87.3 cm) x 17-3/8″ (44.1 cm)

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

•

ASME A112.19.3/CSA B45.4

UNDERCOUNTER SINK

K-3376

Colors/Finishes

•

NA: None applicable

Accessories:

•

CP: Polished Chrome

•

Other: Refer to Price Book for additional colors/ﬁnishes

Speciﬁed Model

Model Description Colors/Finishes

K-3376 Undercounter sink ❑ NA

Recommended Accessories

K-8801 Duostrainer

sink strainer ❑ CP ❑ Other______

K-8813 Stainless steel sink strainer with tailpiece ❑ CP

K-8814 Stainless steel sink strainer less tailpiece ❑ CP

Product Speciﬁcation

The undercounter sink shall be 34-3/8″ (87.3 cm) in length and 17-3/8″ (44.1 cm) in width. Sink shall be made of 18 gauge

stainless steel. Sink shall be single compartment with rounded bowl. Sink shall include installation hardware. Sink shall be

Kohler Model K-3376.

UNDERTONE

Page 1 of 2

1021002-4-

USA/Canada: 1-800-4KOHLER

(1-800-456-4537)

www.kohler.com

PAGE 1
UNDERTONE® Features • • • • • • UNDERCOUNTER SINK K-3376 18-gauge stainless steel Single compartment Undercounter Includes installation hardware Rounded bowl(s) 34-3/8″ (87.3 cm) x 17-3/8″ (44.1 cm) Codes/Standards Applicable Specified model meets or exceeds the following: • ASME A112.19.3/CSA B45.
PAGE 2
UNDERTONE® Technical Information Installation Notes Install this product according to the installation guide. Fixture*: Basin area 34-3/8″ (87.3 cm) x 17-3/8″ (44.1 cm) Water depth 10″ (25.4 cm) Drain hole 3-5/8″ (9.2 cm) D. *Approximate measurements for comparison only. Included components: Hardware kit Cut-out template Allow a minimum of 2″ (5.1 cm) clearance around the sink rim for clip attachment. 91915 1042725-7 9-1/4" (23.5 cm) Countertop 18-1/2" (47 cm) Sink Clip 2" (5.1 cm) Min 17-3/4" (45.