Specification

Technical Information
Fixture:
Configuration two-piece,
elongated
Water per flush 1.4 gallons (5.3 L)
Passageway 2-1/4″ (5.7 cm)
Water area 12″ (30.5 cm) x 10″
(25.4 cm)
Water depth from rim 5-3/4″ (14.6 cm)
Seat post hole centers 5-1/2″ (14 cm)
Minimum static pressure required 20 psi (137.9 kPa)
Maximum static pressure 80 psi (551.6 kPa)
Included Components*:
Bowl K-4304
Tank K-4645
Tank cover 1036375
Trip lever K-9481
Tank accessory pack 73062
Bolt cap accessory pack 52048
*Equipped with Sloan FlushmateTM – Sloan Valve
Company
Installation Notes
Install this product according to the installation guide.
For back-to-back installations, the toilet shall be connected to
the vertical stack using one of the three following fittings:
double fixture fitting, double combination wye and 1/8 bends,
or double wye and 1/8 bends.
Will comply with the American Disabilities Act (ADA) when
installed per the requirements of the Accessibility Guidelines,
Section 604 Water Closets, of the Act. The Model Plumbing
Codes require the installation of elongated open-front toilet
seats in public bathrooms.
Will comply with CSA B651 when installed per Clause 4.3.6
of the standard.
Will comply with OBC when installed per Clause 3.8.3.8 and
3.8.3.9.
30-1/8" (76.5 cm)
21-1/4" (54 cm)
L of Outlet
C
Front of Bowl
3/8" NPT Supply
12" (30.5 cm)
6" (15.2 cm)
5" (12.7 cm)
1"
(2.5 cm)
3-5/8"
(9.2 cm)
17"
(43.2 cm)
31-1/4"
(79.4 cm)
8"
(20.3 cm)
9-7/8"
(25.1 cm)
17-1/4"
(43.8 cm)
8-5/8"
(21.9 cm)
Product Diagram
HIGHLINE
®
HIGHLINE
®
PRESSURE-LITE
®
TOILET
Page2of2
1044957-4-
E