Specification

Optional Accessories
K-4650 Lustra
TM elongated open front toilet seat – for ADA compliance ❑ 0 ❑ Other_____
Technical Information
Fixture:
Configuration one-piece, elongated
Water per flush 1 gal (3.8 L)
Passageway 2-1/8″ (5.4 cm)
Water depth from rim 5-7/8″ (14.9 cm)
Water area 9″ (22.9 cm) x 7″ (17.8 cm)
Seat post hole
centers
5-1/2″ (14 cm)
Minimum static
pressure required
35 psi (241 kPa)
Included components:
Tank cover 1055954
Bolt cap accessory pack 1013092
Toilet seat 74917
Tank accessory pack 84301
Installation Notes
Install this product according to the installation guide.
Will comply with the American Disabilities Act (ADA) when
installed per the requirements of the Accessibility Guidelines,
Section 604 Water Closets, of the Act. Plumbing Codes
require open-front elongated seats in public use bathrooms.
Section 604 states the required height of the toilet is 17″ (43.2
cm)to19″ (48.3 cm) from the floor to the top of the seat to
meet ADA requirements.
Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All
dimensions are nominal.
19-1/2" (49.5 cm)
Front of Bowl
16-5/8"
(42.2 cm)
3/8" NPT Supply
4-3/4"
(12.1 cm)
10-1/4"
(26 cm)
6-1/2"
(16.5 cm)
2-5/8"
(6.7 cm)
16-1/2"
(41.9 cm)
21-1/2"
(54.6 cm)
2-7/8"
(7.3 cm)
9-3/4"
(24.8 cm)
L of Outlet
12" (30.5 cm)
30" (76.2 cm)
1/2"
(1.3 cm)
3"
(7.6 cm)
C
Product Diagram
SAN RAPHAELTM
SAN RAPHAELTM COMFORT HEIGHTTM ELONGATED TOILET
Page2of2
1086530-4-
C