Specification

Recommended Accessories (continued)
K-7678 1/2″ NPT straight stop ❑ CP ❑ Other_____
Technical Information
Fixture:
Configuration two-piece, elongated
Water per flush 1.6 gpf (6 lpf) or 0.8 gpf (3 lpf)
Passageway 2″ (5.1 cm)
Water area 4-1/2″ (11.4 cm) x
5-3/4″ (14.6 cm)
Water depth from rim 8-1/2″ (21.6 cm)
Seat post hole centers 5-1/2″ (14 cm)
Included components:
Bowl K-4322
Tank K-4419
Tank cover 1052066
Push buttons 1035417
Installation Notes
IMPORTANT! The rough-in must be 12″ (30.5 cm) or more
from the base of the wall or baseboard. The base of the toilet
fits tightly against the wall or baseboard. The toilet will not fit
correctly if there is less than 12″ (30.5 cm) of clear space
between the base of the wall or baseboard and the centerline
of the outlet. Install or relocate the supply and outlet as
necessary to conform to rough-in dimensions.
NOTE: If a baseboard causes the rough-in to be less than
12″ (30.5 cm), it must be cut or removed to allow space for
the toilet.
If this toilet is installed to new construction, install a new
supply stop following the dimensions in the diagram.
In installations with the supply stop installed, the existing
supply stop may need to be relocated if it is less than 8-1/2″
(21.6 cm) from the centerline of the toilet. Dry fit the toilet to
confirm if the supply stop needs to be relocated.
The supplied hose will extend roughly 6″ (15.2 cm) from the
toilet. If the supplied hose does not reach the supply stop, a
longer supply hose may be used.
12" (30.5 cm)
Min
22-13/16" (58 cm)
8-1/2"
(21.6 cm) Min
27-5/8" (70.2 cm)
11-13/16"
(30 cm)
11" (28 cm)
15-3/4"
(40 cm)
3/8" NPT
Supply
14-3/4"
(37.5 cm)
14-3/16"
(36 cm)
Front of Bowl
7"
(17.8 cm) D.
3/8" D.
Mounting
Holes
31-1/2"
(80 cm)
12"
(30.5 cm)
Min
5-1/2"
(14 cm)
6-11/16"
(17 cm)
10-13/16"
(27.5 cm)
6-7/8"
(17.5 cm)
5" (12.7 cm) Range
For Existing Supply
Product Diagram
PERSUADE
®
PERSUADE
®
DUAL FLUSH TOILET
Page2of2
1087557-4-
C