Installation Guide

1. Install the Handshower
From the top of the bath or finished deck, insert the smaller end
of the flexible hose down through the hose guide.
From the underside of the bath or finished deck, insert one
washer into the flexible hose.
Thread the flexible hose into the high pressure hose.
Insert one washer into the other end of the high pressure hose.
Connect the high pressure hose onto a vacuum breaker (if
installed), or to the appropriate water source.
Run cold and hot water through the hoses to flush out dirt and
debris.
Check for leaks.
Turn the cold and hot water valves off.
Insert the two fiber washers into the end of the flexible hose.
Thread the handshower holder onto the flexible hose.
Insert the screen washer into the end of the handshower holder.
Washer
Water Source
High Pressure Hose
Washer
Handshower Handle
Flexible Hose
Flexible Hose
Fiber Washer
Hose Guide
Fiber Washer
Handshower Holder
Screen Washer
Kohler Co. 3 1041355-2-C