Specification

Optional Accessories
K-4650 Lustra
TM elongated open-front toilet seat - for ADA compliance ❑ 0 ❑ Other_____
Technical Information
Fixture:
Configuration two-piece, elongated
Water per flush 1.28 gpf (4.8 lpf)
Passageway 2-1/8″ (54 mm)
Water area 11″ (279 mm) x
8-3/4″ (222 mm)
Water depth from rim 6″ (152 mm)
Seat post hole centers 5-1/2″ (140 mm)
Included components:
Bowl K-4306
Tank K-4469
Tank cover 1070414
Trip lever 1075348
Tank attachment kit 1016548
Bolt cap accessory pack 1013092
Installation Notes
Install this product according to the installation guide.
For back-to-back toilet installations: Use only a 45° double
wye fitting.
Will comply with the Americans with Disabilities Act (ADA)
when installed per the requirements of the 2010 ADA
Standards for Accessible Design, Section 604 Water Closets,
of the Act. The Model Plumbing Codes require the installation
of elongated open-front toilet seats in public bathrooms.
The model is acceptable for left-hand Accessible compartment
installations only.
16-3/4" (425 mm)
Front of Bowl
C
L of Toilet
30" (762 mm)
12" (305 mm)
3/8" NPS Supply
9" (229 mm)
9-3/16"
(233 mm)
10"
(254 mm)
15-3/4"
(400 mm)
30-1/2"
(775 mm)
16-1/2"
(419 mm)
5"
(127 mm)
4-1/2"
(114 mm)
3-1/2"
(89 mm)
8-15/16"
(227 mm)
9/16"
(14 mm)
Do not use a
double sanitary tee.
Use a 45˚ double
wye fitting.
For Back-to-Back Toilet Installations
Product Diagram
KELSTONTM
KELSTONTM COMFORT HEIGHT
®
TOILET
Page2of2
1126367-4-
D