Specification

Product Information
Applicable product:
Comfort Height toilet K-3551
Fixture:
Configuration two-piece, elongated
Flow rate 1.28 gpf (4.8 lpf)
Passageway 2-1/8″ (54 mm)
Water area 11-1/2″ (292 mm) x
8-1/2″ (216 mm)
Water depth from rim 6-1/4″ (159 mm)
Seat post hole centers 5-1/2″ (140 mm)
Included components:
Bowl K-4356
Tank cover 1046467
Trip lever 1067186
Tank K-4431
Tank accessory pack 1016548
Bolt cap accessory pack 1013092
Installation Notes
Install this product according to the installation guide.
For back-to-back toilet installations: Use only a 45° double
wye fitting.
Will comply with the Americans with Disabilities Act (ADA)
when installed per the requirements of the 2010 ADA
Standards for Accessible Design, Section 604 Water Closets,
of the Act. The Model Plumbing Codes require the installation
of elongated open-front toilet seats in public bathrooms.
Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All
dimensions are nominal.
17-7/8" (454 mm)
Front of Bowl
3/8" NPT Supply
29" (737 mm)
15-7/8"
(403 mm)
10"
(254 mm)
9-1/4"
(235 mm)
5"
(127 mm)
30"
(762 mm)
16-1/2"
(419 mm)
12"
(305 mm)
2-3/4"
(70 mm)
1"
(25 mm)
4-1/2"
(114 mm)
8-3/16"
(208 mm)
Do not use a
double sanitary tee.
Use a 45˚ double
wye fitting.
For Back-to-Back Toilet Installations
of Toilet
C
L
Roughing-In
K-3551
ARCHER
TM
COMFORT HEIGHT
®
TOILET
ARCHERTM COMFORT HEIGHT
®
TOILET
1151679-1-
D