Rough-In Guide

Product Information
Applicable product:
Elongated bowl toilet with integral seat K-4388
Fixture:
Configuration Top spud, elongated with
integral seat
Water per flush 1.6 gal (6 L)*
Spud size 1-1/2″
Passageway 2-3/8″ (6 mm)
Water area 11″ (279 mm) x 9-1/2″
(241 mm)
Water depth from rim 5-1/4″ (133 mm)
Minimum static pressure
required
35 psi (241.3 kPa)
Maximum static
pressure
80 psi (551.6 kPa)
Minimum flowing
pressure required
25 psi (172.4 kPa)
Required supply
minimum
25 gpm (94.6 lpm)
* Designed to flush with 1.6 gal (6 L) of water when
installed with a 1.6 gpf (6 lpf) valve.
Recommended accessories:
Floor bolts (pair) 21401
Included components:
Spud 18357
Bolt caps (pair) 52048
Floor screws (pair) 21402
Installation Notes
Install this product according to the installation guide.
Refer to manufacturer and local codes for flush valve
requirements.
Will comply with CSA B651 when installed per Clause 4.3.6
of the standard.
Will comply with OBC Barrier Free requirements when
installed per Clause 3.8.3.8 and 3.8.3.9.
Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All
dimensions are nominal.
6-1/2"
(165 mm)
6"
(152 mm)
14"
(356 mm)
27-1/2" (699 mm)
1-1/2" Spud
4-1/4"
(108 mm)
3-3/4"
(95 mm)
4-1/2"
(114 mm)
15"
(381 mm)
8-1/2"
(216 mm)
14-1/2" (368 mm)
8-3/4" (222 mm)
24-1/2"
(622 mm)
8-1/2" (216 mm)
Front of Bowl
L of Outlet
C
Roughing-In
K-4388
ANGLESEY
TM
BOWL
ANGLESEYTM BOWL
115751-1-
BD