Specification Sheet

Technical Information
Fixture:
Configuration top spud, elongated with
integral seat
Water per flush 1.6 gpf (6.0 lpf)*
Spud size 1-1/2″
Passageway 2-3/8″ (60 mm)
Water area 11″ (279 mm) x 9-1/2″
(241 mm)
Water depth from rim 5-1/4″ (133 mm)
Minimum static pressure
required
35 psi (241.3 kPa)
Maximum static
pressure
80 psi (551.6 kPa)
Minimum flowing
pressure required
25 psi (172.4 kPa)
Required supply
minimum
25 gal/min (94.6 l/min)
* Based upon use of a 1.6 gal (6.0 L) flushometer.
Included components:
Spud 18357
Floor screws (pair) 21402
Bolt cap accessory pack 1013092
Installation Notes
Install this product according to the installation guide.
Refer to manufacturer and local codes for flushometer
requirements.
For back-to-back toilet installations: Use only a 45° double
wye fitting.
Will comply with CSA B651 when installed per Clause 4.3.6
of the standard.
Will comply with OBC Barrier Free requirements when
installed per Clause 3.8.3.8 and 3.8.3.9.
6-1/2"
(165 mm)
6"
(152 mm)
14"
(356 mm)
27-1/2" (699 mm)
1-1/2" Spud
4-1/4"
(108 mm)
3-3/4"
(95 mm)
4-1/2"
(114 mm)
15"
(381 mm)
8-1/2" (216 mm)
14-1/2"
(368 mm)
8-3/4" (222 mm)
24-1/2"
(622 mm)
8-1/2" (216 mm)
Front of Bowl
L of Outlet
C
Do not use a
double sanitary tee.
Use a 45˚ double
wye fitting.
For Back-to-Back Toilet Installations
Product Diagram
ANGLESEYTM
ANGLESEYTM ELONGATED TOILET BOWL
Page2of2
115751-4-
BF