HydroRail ® Shower Column Pre-Installation Survey For Retrofit to an Existing Installation
HydroRail Shower Column ™ Before During After Evaluate the Condition of the Existing Shower In a remodeling application, the HydroRail system replaces the existing showerarm connection to the ½" NPT supply elbow inside the wall cavity. The HydroRail system requires that the existing pipe work is in good condition and firmly fixed in place. Pipe work requiring repair or featuring an alternate connection arrangement may require additional work to facilitate the installation of the HydroRail shower column.
Next Steps. Accurate measurements are required to ensure the correct shower column is chosen for your space. B To quickly check if the HydroRail shower column will work for you, please complete the short survey below to determine the right SKU. ® Step 1: Measure the distance from existing showerarm to valve (Fig. 1 A) A If the distance is less than 24", HydroRail is not a suitable product for your project. C Step 2: Measure the distance from existing showerarm to ceiling (Fig.