Installation Guide

3. Mark the Mounting Hole Locations

NOTE: The upper mounting collar must be centered on the supply

adapter. The distance between the upper and lower mounting collar

centers should be 18″ (457 mm) or 27″ (686 mm) depending on the

length of your shower column.

Center the mounting collar on the supply adapter. Mark the left

and right mounting holes.

For K-45209/K-45210 only: From the center of the supply adapter,

measure down 27″ (686 mm) and mark the horizontal

measurement with a pencil.

For K-45211/K-45212 only: From the center of the supply adapter,

measure down 18″ (457 mm) and mark the horizontal

measurement with a pencil.

Center the mounting collar on the horizontal line. Measure and

mark the left and right mounting holes. Ensure the upper and

lower mounting hole locations are level and plumb to one

another.

Do not drill the mounting holes until instructed to do so.

2" (51 mm)

Supply Adapter

Mounting Collar

K-45209, K-45210,

27" (686 mm)

K-45211, K-45212,

18" (457 mm)

1213116-2-A 10 Kohler Co.