Specification Sheet

ManualsBrandsKohler ManualsBathroom FaucetsKohler Taut 0.5 GPM Single Hole Bathroom Faucet

Features

•

3-15/16" (100 mm) spout reach.

•

0.5 gal/min (1.9 l/min) maximum flow rate [max at 60 psi (4.1

bar)].

•

Water-saving vandal-resistant aerator.

•

Single lever handle allows for both on/off activation and

temperature setting.

•

High-temperature limit setting for added safety.

•

KOHLER

ceramic disc valves exceed industry longevity

standards for a lifetime of durable performance.

•

Less grid drain, lift rod, lift rod hole.

Material

•

Premium metal construction.

CSA B651

OBC

•

KOHLER finishes resist corrosion and tarnishing.

Installation

Codes/Standards

ASME A112.18.1/CSA B125.1

•

Single-hole installation (escutcheon plate sold separately).

NSF/ANSI 61

•

Pre-attached flexible supply lines simplify installation.

NSF/ANSI 372

All applicable US Federal and State material

regulations

DOE - Energy Policy Act 1992

California Energy Commission (CEC)

ADA

ICC/ANSI A117.1

CSA B651

OBC

KOHLER

Faucet Lifetime Limited

Warranty

See website for detailed warranty information.

Available Colors/Finishes

Color tiles intended for reference only.

DescriptionCodeColor

Polished ChromeCP

1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

10-15-2019 05:50 - US/CA

Taut

™

single-hole commercial faucet

K-46028-4

Summary of content (2 pages)

PAGE 1
Taut™ single-hole commercial faucet K-46028-4 Features • • • • • • • 3-15/16" (100 mm) spout reach. 0.5 gal/min (1.9 l/min) maximum flow rate [max at 60 psi (4.1 bar)]. Water-saving vandal-resistant aerator. Single lever handle allows for both on/off activation and temperature setting. High-temperature limit setting for added safety. KOHLER® ceramic disc valves exceed industry longevity standards for a lifetime of durable performance. Less grid drain, lift rod, lift rod hole.
PAGE 2
Taut™ single-hole commercial faucet K-46028-4 3-15/16" (100 mm) 6-3/16" (157 mm) 3-9/16" (90 mm) Ø 1-7/8" (48 mm) Ø 1" (25 mm) 2" (51 mm) Max 25" (635 mm) 3/8" Compresion Fittings Technical Information All product dimensions are nominal. Faucet: Flow rate: Pressure: 0.5 gal/min (1.9 l/min) 60 psi (4.1 bar) Drain included: No Notes Install this product according to the installation instructions. ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations.