Installation Guide

4. Install the Seat
Slide the seat onto the mounting plate until you feel it snap into
place.
NOTE: The mounting plate may need to be adjusted to properly
align the seat.
To adjust the seat position, remove the seat by pressing in the
release button and sliding the seat forward.
Reposition the mounting plate as needed.
Reinstall the seat. Repeat the adjustment procedure as needed
until the seat is properly aligned.
Once the seat is positioned as desired, remove the seat and
tighten the mounting plate.
Reinstall the seat.
Release Button
Mounting
Plate
Kohler Co. 7 1054180-2-F