Specification

Technical Information
Fixture:
Water supply pressure 20 psi (139 kPa) - 80 psi
(551 kPa)
Max electrical rating 120 VAC / 60 Hz / 450 W
Power cord length 43″ (1092 mm)
A dedicated circuit protected with a Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device
(RCD) is required.
Installation Notes
Install this product according to the installation guide.
NOTICE: Do not use an extension cord with this product.
NOTICE: Do not plug in the seat until instructed to do so in
the installation guide. This will avoid possible product
malfunction.
14-1/8"
(359 mm)
16-3/8"
(416 mm)
6-5/16"
(160 mm)
11-7/16" (291 mm)
7-7/8"
(200 mm)
19-15/16" (506 mm)
16-1/2" (419 mm)
2"
(51 mm)
2" (51 mm)
6" (152 mm) Min
The receptacle should be located at least
6" (152 mm) above the floor line, and within a
32" (813 mm) radius measured 2" (51 mm)
to the right of the toilet ledge, as shown.
ELECTRICAL SERVICE DETAIL
32" (813 mm) R.
Product Diagram
C
®
- 125
C
®
- 125 TOILET SEAT WITH BIDET FUNCTIONALITY
Page2of2
1097712-4-
B