Rough In Guide

Product Information
Applicable product:
Under-mount kitchen sink K-5281
Fixture*:
Bowl areas 14-9/16″ (370 mm) x 16-1/2″ (419 mm)
Water depth 9″ (229 mm)
Drain holes Ø 3-11/16″ (94 mm)
*Approximate measurements for comparison only.
Included components:
Hardware kit (3 required) 91915
Cut-out template 1207216-7
Included accessories:
Divider dish cloth bar K-6432
Divider utility shelf K-6434
Bottom bowl rack K-6641
Optional accessories:
Sink bridge utility shelf with dish
cloth bar
K-6429
Wood cutting board* K-6667
Duostrainer
®
sink strainer K-8801
*Allow 3/4″ (19 mm) clearance beyond the back of the
bowl.
Installation Notes
Install this product according to the installation guide.
Allow a minimum of 3″ (76 mm) clearance around the sink rim
for clip attachment.
Fixture conforms to ASME Standard A112.19.3/CSA B45.4. All
dimensions are nominal.
1-1/2" OD
13"
(330 mm)
32" (813 mm)
18-1/4"
(464 mm)
7/8" (22 mm)
15-11/16"
(398 mm)
8"
(203 mm)
9-5/16"
(237 mm)
6-1/4"
(159 mm)
Countertop
Sink
Clip
3" (76 mm) Min
Roughing-In
K-5281
STRIVE
TM
UNDER-MOUNT KITCHEN SINK
STRIVETM UNDER-MOUNT KITCHEN SINK
1207209-1-
A