Dimensions Guide

3" (76 mm) Min

Notes

Required Electrical Service

Install this product according to the installation

instructions.

One dedicated circuit required, protected with Class A

Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device

(RCD).

This product is designed for installation with the

electrical and water supplies located through

either the wall or the floor.

120 V, 15 A, 60 Hz

Technical Information

IMPORTANT! Use the supply hoses provided

with the fixture. Do not reuse the previously

installed hoses.

All product dimensions are nominal.

One-piece, Wall-mountToilet type:

FloorWaste Outlet:

ADA, OBC, CSA B651 compliant when installed

to the specific requirements of these regulations.

ElongatedBowl shape:

1-15/16" (49 mm)Trap passageway:

Plumbing codes may require elongated toilets

and elongated, open-front seats in public

bathrooms.

Water Consumption

0.8 gpf (3 lpf)Reduced:

Accessibility standards may require controls to

be located on the open side of the toilet.

7-15/16" x 5-5/8" (202 mm x 143 mm)Water surface size:

12" (305 mm)Rough-in:

Fixture Supply Requirements

6 gpm (22.7 lpm)Min flow rate:

1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

3-18-2019 09:13 - US

Veil

Comfort Height

intelligent one-piece elongated dual-flush toilet

K-5401-PA