Installation Guide

Remote Control – General Features
IMPORTANT! To activate features using the remote control, the remote must be paired with the toilet.
Refer to the ″Remote Control – Setup″ section.
Power - Press the power button to turn the remote control on or off.
Seat Cover - With the seat unoccupied, press this ″Cover″ icon to open or close the cover.
Seat - With the seat unoccupied, press the ″Seat″ icon to open or close the seat.
Eco Flush - Press the ″Flush-eco″ icon to flush the toilet with 0.8 gpf (3 lpf).
Full Flush- Press the ″Flush-full″ icon to flush the toilet with 1.6 gpf (6 lpf).
Heated Seat Temperature - While seated, press the ″Seat temp″ icon, then press again to increase or
decrease the temperature. The dots to the left of the icon indicate the temperature setting. There are
five settings.
Stop - Press the ″Stop″ icon to stop the cleansing wash, dryer, deodorizer, and UV sterilization.
Press and hold to turn off the remote control.
Dryer - While seated, press the ″Dryer″ icon to activate air flow. Press again to increase or decrease
the temperature.
UV Disinfection - With the seat unoccupied, press the ″Clean″ icon to initiate wand disinfection.
The feature is active when the icon is blinking.
Power Button
Docking Station
1325704-5-A 6 Kohler Co.