Installation Sheet

2. Mark the Pipes - Bowl Side
IMPORTANT! If silicone plumbers grease is not applied to the
gaskets, they will bind during fitting, which will result in the pipes
being cut to incorrect lengths.
NOTE: This step is easier with the bowl upside down.
Install the gasket on the ribbed end of the inlet pipe.
NOTE: The outlet pipe gasket comes positioned on the thin portion
of the outlet pipe. Remove the gasket and reinstall it as shown.
Install the outlet pipe gasket on the flared end of the outlet pipe.
Apply silicone plumbers grease to the outlet pipe gasket.
Firmly fit the outlet pipe and gasket over the bowl outlet,
pushing until it contacts the bowl.
Position a level or other straight edge across the back of the bowl.
Mark the outlet pipe at the back edge of the bowl using the level
as a guide.
Apply silicone plumbers grease to the outside of the inlet pipe
gasket.
Straight Edge
or Level
Gasket
Inlet
Pipe
Outlet
Pipe
Gasket
Silicone
Plumbers
Grease
Outlet
Pipe
Inlet Pipe
Silicone
Plumbers
Grease
Kohler Co. 5 1247364-2-A