Installation Guide

4. Install the Steam Generator
WARNING: Risk of property damage. Allow a minimum of 12 (305 mm) of air space around the
steam generator at all times. This provides an area for the heat generated by the unit to dissipate.
NOTICE: For optimum performance, install the steam generator as close as possible to the steam head.
The steam generator must be installed within 25’ (7.62 m) of the steam head.
Install the desired drain pan at the steam generator location. Kohler Co. recommends using a
KOHLER drain pan.
12" (305 mm)
Single Installation Dual Installation
Steam Outlet
Water Inlet
Pressure
Relief Valve
Drain Pan
Drain (install per
applicable codes.)
Control
Cable
Input
Maintain a 12" (305 mm)
minimum space around
the units.
1230488-2-B 10 Kohler Co.