Installation Guide

Operation
Status LED Lights
″GEN TEST″ = steam generator connection/function.
″TEMP SENSOR″ = temperature sensor connection/function.
″DATA LINK″ = data cable connection/function.
Normal Operation
Each of the main LEDs (″GEN TEST,″″TEMP SENSOR,″ and
″DATA LINK″) blinks green once every second (1 second ON, 1
second OFF).
Abnormal Operation
One or more of the main LED status lights (″GEN TEST,″″TEMP
SENSOR,″ and ″DATA LINK″) is OFF, ON flashing red, ON solid
green, or ON solid red.
Refer to the ″Troubleshooting″ section for more information.
Power Clean Function
WARNING: Risk of personal injury. Stay out of the
showering area when the power clean function is activated.
NOTICE: Users will be automatically reminded to use power clean
after 600 minutes of steam generator use. The steam generator may
be run three more times before the power clean function must be
run. Failure to initiate power clean after the third reminder will
result in the system locking. Power clean must then be run to
resume steam operation.
NOTE: When the power clean function is activated, water will
discharge from the steam head.
1235393-2-C 14 Kohler Co.