Specification Sheet

ManualsBrandsKohler ManualsPlumbingDTV+ Steam Adapter Kit with Temperature Sensor, Adapter, and Steam Head with Aromatherapy Reservoir

Invigoration

Series DTV+

™

Steam adapter kit

K-5548-K1

7/16"

(11 mm)

11/16"

(17 mm)

30' (9.1 m)

Cable

Wall

Temperature

Sensor

Ø 7/16" (11 mm)

Hole

3/4"

(19 mm)

Terminator

1/2"NPT

2-1/4"

(57 mm)

1-1/4"

(32 mm)

3/4"

(19 mm)

Drip Loop

(102 mm)

3-1/4" (83 mm)

1-7/8"

(32 mm)

Ø 3" (76 mm)

1/2"NPT

Steam Head and Steam

Housing Assembly

User Interface Control

Technical Information

All product dimensions are nominal.

Drain included: No

Notes

Install this product according to the installation

guide.

CAUTION: Risk of scalding. Do not locate the

steam head near a seat or bench, as the steam

head is hot during operation and may scald the

user if touched.

The temperature sensor should be mounted on

the wall opposite the steam head. The steam

head should be located as far from the seating

area as possible.

Locate the steam head 6" (152 mm) above

the floor and at least 4-1/2" (114 mm) from the

threshold.

1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

5-29-2021 19:55 - US/CA