Installation Guide

7. Complete the Installation
If not already installed, install the K-99695 system controller
according to the instructions packed with the product.
Connect the data cable into one of the eight grouped component
ports on the controller.
Turn on the water supply.
Restore the power at the main breaker panel.
For information on system setup and operation, refer to the guide
on the controller product page at www.us.kohler.com.
Before Operating the System For the First Time:
Download and install the latest software for connected components.
This may take an hour or more to complete based on system
configuration and internet connection speed. Do not disconnect the
power from any component during software download and
installation.
From Steam
Adapter
Data Cable
Controller
Kohler Co. 13 1235393-2-C