Specification Sheet

Invigoration
®
Series DTV+
™
Tandem steam adapter kit
K-5549-K1
Ø 3" (76 mm)
1-7/8"
(32 mm)
3-1/4" (83 mm)
4"
(102 mm)
Drip Loop
3/4"
(19 mm)
1-1/4"
(32 mm)
2-1/4"
(57 mm)
1/2"NPT
Steam Head and Steam
Housing Assembly
3/4"
(19 mm)
Ø 7/16" (11 mm)
Hole
Temperature
Sensor
Wall
30' (9.1 m)
Cable
11/16"
(17 mm)
7/16"
(11 mm)
User Interface Control
Terminator
Technical Information
All product dimensions are nominal.
Drain included: No
Notes
Install this product according to the installation
guide.
CAUTION: Risk of scalding. Do not locate the
steam head near a seat or bench, as the steam
head is hot during operation and may scald the
user if touched.
The temperature sensor should be mounted on
the wall opposite the steam head. The steam
head should be located as far from the seating
area as possible.
Locate the steam head 6" (152 mm) above
the floor and at least 4-1/2" (114 mm) from the
threshold.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-29-2021 19:55 - US/CA