Specification Sheet

1-7/8"
Notes
Technical Information
Install this product according to the installation
guide.
All product dimensions are nominal.
CAUTION: Risk of personal injury. Do not install
the User Interface Control outside the steam
enclosure. The User Interface must be installed
within the enclosure to allow the sensors to
regulate the temperature and control the flow of
steam.
CAUTION: Risk of scalding. Do not locate the
steam head near a seat or bench, as the steam
head is hot during operation and may scald the
user if touched.
The temperature sensor should be mounted on
the wall opposite the steam head. The steam
head should be located as far from the seating
area as possible.
Locate the steam head 6" (152 mm) above the
floor and at least 4-1/2" (114 mm) from the
threshold.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
12-20-2016 06:05
Novita Steam
Tandem Steam Generator Control Kit
K-5558