Installation Guide

Tools/Outils/Herramientas
Before You Begin
NOTE: For service parts information, visit http://www.kohler.com/serviceparts.
CAUTION: Risk of property damage. Before finishing the wall, ensure the supply
lines are connected to the mixer valve with the cold supply line plumbed on the left
and the hot supply line plumbed on the right. Doing so will avoid replacing the
finished wall due to error.
IMPORTANT! Unless otherwise indicated, the diagrams in this document show the
installation for a handle located to the right of the spout. The valve is designed for
handle installation on the right side. Special steps will need to be performed to
position the handle to the left of the valve.
NOTICE: For exterior wall installations, be sure proper wall insulation is installed to
prevent frozen pipes.
Observe all local plumbing and building codes.
Shut off the main water supply.
Carefully inspect supply tubing for any sign of damage.
The supplied plaster guard will also be used to assemble the valve. The supplied
spout tool will also be used for alignment of the spout escutcheon.
Kohler Co. reserves the right to make revisions in the design of faucets without
notice, as specified in the Price Book.
2x4 Lumber
Lambourde de 2x4
Listones de 2x4
#10 Wood Screws
Vis à bois #10
Tornillos para madera
del #10
Plumbers Putty
Mastic de plombier
Masilla de plomería
Level
Niveau à bulle
Nivel
Hex Wrenches
Clés hexagonales
Llaves hexagonales
Tape Measure
Mètre ruban
Cinta para medir
Solder
Fer à souder
Suelda
Propane Torch
Torche au propane
Soplete de propano
Pencil
Crayon
Lápiz
Tube Cutter
Coupe-tubes
Cortatubos
1-3/16" and 2-3/16" Hole Saw
Scie circulaire de 1- 3/16" et 2-3/16"
Corona perforadora de 1-3/16" y 2-3/16"
5/64"
3/32"
1095311-2-H 2 Kohler Co.