Rough In Guide

Product Information
Applicable product:
Wall-hung toilet with in-wall tank and
carrier system
K-6303
Fixture:
Configuration Wall-hung elongated bowl
toilet
Water per full flush 1.6 gpf (6 lpf)
Water per half flush 0.8 gpf (3 lpf)
Passageway 2-1/4″ (57 mm)
Water area 4-1/2″ (114 mm) x 5-1/2″
(140 mm)
Seat post hole centers 5-1/2″ (140 mm)
Included components:
Bowl K-6299
Toilet seat K-4008
In-wall tank and carrier system K-6284
Dual flush actuation plate K-6298
Installation Notes
Install this product according to the installation guide.
Refer to manufacturer and local codes for flush valve
requirements.
In-wall tank and carrier system install in wall opening
5-1/2″ (140 mm) x 19″ (483 mm) x 50″ (1270 mm) minimum.
Will comply with the American Disabilities Act (ADA) when
installed per the requirements of the 2010 ADA Standards for
Accessible design, Section 604 Water Closets. The Model
Plumbing Codes require the installation of elongated
open-front toilet seats in public bathrooms.
Fixture conforms to ASME standard A112.19.2/CSA B45.1. All
dimensions are nominal.
17-1/4"
(438 mm)
18-13/16"
(478 mm)
46-7/8"
(1191 mm)
Adjustable Height
3" (76 mm) Min
10-1/2" (267 mm) Max
14-9/16"
(370 mm)
1-9/16"
(40 mm)
5-1/2"
(140 mm) Min
1/2" (13 mm)
3-1/2" (89 mm) Min
4" (102 mm) Max
21"
(533 mm)
15-1/8"
(384 mm)
13-3/4"
(349 mm)
of Outlet
C
L
12-15/16"
(329 mm)
7-3/8"
(187 mm)
Dual Flush
Actuation Plate
7-1/4"
(184 mm)
5-1/2"
(140 mm)
1/2" NPT
Ø 3-9/16"
(90 mm)
Roughing-In
K-6303
VEIL
WALL-HUNG TOILET
VEIL WALL-HUNG TOILET
1142998-1-
C