Specification Sheet

21"
(533 mm)
3/8"
(10 mm)
16-1/16"
(408 mm)
Drop-in Rim
Detail
No change in measurements if connected
with drain illustrated. (K-7213)
1-1/2" Bath Drain
Lumbar
Angle 28°
Blower Motor Access
30" (762 mm) W x 15" (381 mm) H Min
66" (1676 mm)
10-13/16"
(275 mm)
3-1/2"
(89 mm)
4-3/16"
(106 mm)
1-1/2"
(38 mm)
20"
(508 mm)
1-1/2"
(38 mm)
42" (1067 mm)
Notes
Required Electrical Service
Measure your actual product for rough-in details.
Two dedicated circuits required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Outside North America,
this device may be known as a Residual Current Device (RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower, Heated
Surface:
120 V, 15 A, 60 HzAir bath:
Technical Information
All product dimensions are nominal.
Drop-inInstallation:
EndDrain location:
48-5/8" x 24-1/2" (1235 mm x 622 mm)Basin area, bottom:
60" x 32-3/16" (1523 mm x 818 mm)Basin area, top:
122 lbs (55.3 kg)Weight:
34 lbs/ft² (166 kg/m²)Minimum floor load:
14-5/16" (364 mm)Water depth:
70 gal (265 L)Water capacity:
Drop-in, 1233384-7, not required, includedTemplate:
Blower: 120 V, 10 A, 60 Hz
Heated Surface: 120 V, 0.5 A, 60 Hz, 65
Electrical component
rating:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
4-14-2020 06:32 - US/CA
Sunward
®
66" x 42" Heated BubbleMassage
™
air bath with Bask
™
K-6347-GHW