Installation Guide

3. Install the Soap/Lotion Dispenser
If assembled, turn the bottle clockwise to remove it.
Remove the nut from the pump assembly.
Ensure the washer is placed underneath the escutcheon.
Insert the pump assembly through the desired mounting hole.
From underneath the mounting surface, reinstall the nut. Tighten
the nut until the escutcheon is firmly held in place.
From underneath the mounting surface, reinstall the bottle.
Remove the pump assembly from the mounting hole.
Fill the bottle with soap or lotion.
Reinsert the pump assembly.
Pump Assembly
Nut
Bottle
Escutcheon
Kohler Co. 5 1048033-2-B