Installation Guide
2. Install the Remote Valve
NOTE: The remote valve must be located within 12″ (30.5 cm) of the
spout.
Slide the O-ring over the supply hoses onto the base of the
remote valve.
Insert the remote valve through the hole in the mounting surface.
Assemble the bracket and nut to the stud from underneath the
mounting surface.
Align the handle and securely tighten the nut.
Remote Valve
Handle
Stud
Supply Hoses
Bracket
Nut
O-Ring
Inlet Hose
Sink
1048033-2-B 4 Kohler Co.