Installation Guide

5. Custom Component Configurations
Draw in the components for your custom shower.
Draw lines from the valve to each component. Be aware that:
•
Outlet 1 is always recommended to be the primary showerhead.
•
The installer must determine the desired sequence for Single mode and plumb the ports to the
bodysprays accordingly.
•
Custom mode will allow the user to select a different water outlet as the primary showerhead, but it
is not recommended.
•
In Custom mode, the bodysprays will cycle up the solenoid bank regardless of which port is the
primary outlet.
Wall 3
Floor
Ceiling
Wall 2
Wall 1
Wall 1
Floor
Wall 2
CH 12 34 56
12 34 56CH
1043183-2-B 10 Kohler Co.