Installation Guide

8. Install the Horizontal Tissue Holder
Place the escutcheon onto the wall bracket, then place the O-ring
onto the escutcheon.
Slide the spline adapter into the escutcheon. Secure with the
screw provided.
Place the sleeve over the spline adapter.
Place the washer over the sleeve.
Position the tissue holder assembly onto the assembled
escutcheon.
Hold the tissue holder assembly in place while turning the
escutcheon clockwise until hand tight. Do not overtighten.
Adjust the tissue holder assembly in the desired position.
Tissue Holder Assembly
Wall Bracket
Escutcheon
O-Ring
Spline Adapter
Sleeve
Washer
Screw
1020822-2-B 12 Kohler Co.