Installation Guide

5. Assemble and Attach the Hinge Jamb
Lay the hinge jamb on the floor or on a workbench. Use a drop cloth to protect the product finish.
Insert the hinge into the slot on the hinge jamb. The slots in the hinge should be on the outside
edge of the hinge.
Secure the hinge to the hinge jamb using four #8-18 x 3/8″ panhead screws (provided). Make sure
the top edge of the hinge is flush with top edge of the hinge jamb before tightening the screws.
#8-18 x 3/8"
Panhead
Screw
Hinge
Hinge
Jamb
Hinge
Jamb
Hinge
Insert the hinge
into the slot making
sure the top edges
are flush.
Slot
Top View
Top View
Hinge
Hinge Jamb
Kohler Co. 7 1036565-2-B