Installation Guide

18. Install the Inside Transom Panel
IMPORTANT! The plastic transom frame will come pre-installed to the inside transom panel. When the
panel is installed, the handle will be oriented on the strike side of the door toward the inside of the
shower and the plastic frame should be on the bottom. The plastic frame may be removed and reinstalled
to the opposite side of the panel if needed.
From inside the shower, lift the inside transom panel up into the inside track of the top track.
Tilt the bottom of the panel towards the header until it sits on the top of the header.
CAUTION: Risk of injury or product damage. The panel will not be safely in place at this time.
Hold the panel with two hands until it is temporarily in place inside the transom filler.
Slide the panel into the transom filler on the strike side of the door.
Inside Transom
Panel
Top Track
Header
Inside
Track
Inside of
Shower
Plastic Frame
Handle
1144163-2-B 22 Kohler Co.