Installation Guide

5. Position the Second Wall Jamb
IMPORTANT! The wall jamb must fit tightly against the shower base/bath ledge and wall.
Position the second wall jamb against the wall and over the threshold on the opposite shower wall.
If needed, shape and file the bottom corner to fit against the shower wall. Use a coin to match and
transfer the corner radius.
Plumb the wall jamb.
Tape the wall jamb securely in place and mark its location.
Make sure the threshold is still parallel with the front of the shower base/bath ledge.
Wall Jamb
1314827-2-A 8 Kohler Co.