Manualshelf

Installation Guide

ManualsBrandsKOHLER ManualsAlcove Shower DoorsLevity 59.625 in. W x 74 in. H Frameless Sliding Shower Door in Anodized Dark Bronze
11121314151617181920
16. Assemble the Inside Panel
NOTICE: The inside panel roller mounting holes are 5″ (127 mm) below the top of the panel.
NOTICE: The inside rollers contain a brass insert.
Position each roller on the same side of the panel as the label.
Install each inside roller with the tab on top. This will position the door at its highest setting,
allowing for easier adjustment if necessary.
Secure each roller with a #10-24 x 1-1/4” screw.
Using a hand screwdriver only, securely tighten the screws.
#10-24 x 1-1/4"
x2
5"
(127 mm)
Tab Up
Clamp
Inside Roller
Brass Insert
Kohler Co. 19 1314827-2-A