Installation Guide

22. Install the Outside Panel
NOTICE: Locate the notches on the header, which are aligned with the Panel Installation Area labels.
With help, from outside the shower, lift the panel and position the open channel of the bottom
frame over the centerguide rail.
With help, lift the panel, align one roller clip with a notch, and set the roller on the roller track.
Lift the opposite end of the panel so the second roller is above the header. Slide the panel to align
the second roller clip with the second notch. Set the roller onto the roller track.
Label
Rail
Kohler Co. 25 1314827-2-A