Installation Guide

23. Confirm Correct Installation
Confirm all rollers are engaged in the header tracks.
The tops of the inside rollers should be inside the header.
The clips on the outside rollers should be engaged inside the top edge of the header. They should
not be visible.
The rails of the centerguide should be engaged inside the bottom frames of the door panels. They
should not be visible.
The threshold should be snapped down completely over the centerguide connector.
Outside
Roller
Inside
Roller
Header
Clip
Centerguide
Threshold
Inside
Door
Panel
Outside
Door
Panel
1314827-2-A 26 Kohler Co.