Installation Guide

24. Adjust the Rollers
The rollers may require adjustment if a panel does not move, makes a scraping sound when moved,
or if an upper or lower bumper does not make contact when closed.
Adjust the alignment of each end of the panel by loosening the screws and turning the adjustment
clamp.
When adjusting the outside panel, hold the clip cover straight while securely tightening the screws
so the clip does not scrape in its track.
Repeat until the door operates smoothly and aligns evenly with the shower walls.
Confirm the clips are still oriented correctly (see step 23). Securely tighten the screws.
Screw
Clamp
Kohler Co. 27 1314827-2-A