Installation Guide

28. Install Bar/Handle and Apply Silicone
Install the towel bar or handle using the separate instructions provided.
Apply 100% silicone sealant along the wall jambs inside and outside the shower, and along the
outside edge of the threshold.
Care and Cleaning
For best results, keep the following in mind when caring for your KOHLER product:
•
Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
•
Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and
dry any overspray that lands on nearby surfaces.
•
Do not allow cleaners to soak on surfaces.
•
Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring
pad to clean surfaces.
Kohler Co. 31 1314827-2-A