Installation Guide

1. Confirm Ledge and Wall Compatibility
IMPORTANT! Confirm that the shower base/bath ledge and walls meet the following requirements:
There must be at least 2-1/2” (64 mm) of flat surface on the shower base/bath ledge and walls.
Walls must be within 3/8” (10 mm) of plumb.
The shower base/bath ledge must be within 3/8″ (10 mm) of level.
Do not install the door if these requirements are not met.
2-1/2"
(64 mm)
Min
2-1/2"
(64 mm)
Min
1314827-2-A 4 Kohler Co.