Installation Guide

3. Prepare the First Wall Jamb
IMPORTANT! The wall jamb must fit tightly against the shower base/bath ledge and wall.
Position the wall jamb against the wall so that it is 1/16″ from the shower base/bath ledge radius as
shown.
If needed, shape and file the bottom corner to fit against the shower wall. Use a coin to match and
transfer the corner radius.
Plumb the wall jamb.
Tape the wall jamb securely in place and mark its location.
1/16"
(2 mm)
Wall Jamb
1314827-2-A 6 Kohler Co.