Manualshelf

Installation Guide

ManualsBrandsKOHLER ManualsBathroomPrim 79.0625-in H x 54.625-in to 59.625-in W Frameless Bypass/Sliding Anodized Brushed Nickel Shower Door
11121314151617181920
15. Assemble the Inside Panel Rollers
NOTICE: There is a triangle shape molded on one of the flats of the roller.
Orient the door panel so that the handle holes are on the showerhead side and the label faces the
outside of the shower.
Position the roller and gasket on the opposite side of the panel as the label as shown, and insert the
roller cam into the hole.
Orient the roller so that the triangle is pointing up. This sets the door at its lowest position, making
adjustments easier.
Firmly handtighten the roller to the glass with the gasket and bolt.
Using the supplied wrench, securely tighten the bolt at least 3/4 turn past hand-tight. The gasket
may flex as the bolt is tightened.
Repeat these steps for the second roller.
Triangle Up
Gasket
Cam
Wrench
Bolt
Bolt
Gasket
1380408-2-B 18 Kohler Co.