Rough-In Guide

Product Information
Applicable product:
Bath– left drain K-713
Bath right drain K-714
Fixture*:
Bathing well:
Basin area, bottom 45 (114.3 cm) x 22 (55.9 cm)
Basin area, top 55 (139.7 cm) x 24 (61 cm)
Weight 330 lbs (149.7 kg)
To overflow:
Water depth 8-5/8 (21.9 cm)
Capacity 33 gal (124.9 L)
* Approximate measurements for comparison only.
Installation Notes
Install this product according to the installation guide.
Floor support under the bath must provide for a minimum of
44 lbs/square foot (215.7 kg/square meter) loading.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
Will comply with CSA B651 when installed per Clause 4.4.7
of the standard.
will comply with OBC when installed per Clause 3.8.3.13.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
1/4" (6 mm)
2-7/8" (7.3 cm)
3-1/4"
(8.3 cm)
60" (152.4 cm)
Subfloor
7/8" (2.2 cm)
1-5/8" (4.1 cm)
No change in measurements if connected with drain
illustrated.
Finished Wall
14"
(35.6 cm)
1/2"
(1.3 cm)
Finished Floor
3" (7.6 cm)
1-1/2" NPT
Thread
1-1/2" OD
8-1/2"
(21.6 cm)
34-1/4"
(87 cm)
Finished Wall
18-1/4"
(46.4 cm)
Roughing-In
K-713, K-714
VILLAGER
TM
BATH
VILLAGERTM BATH
106549-1-
C

Summary of content (1 pages)