Installation Guide

1018154-2-B
Kohler Co.
4
Overflow Tube
Coupling
Nuts
Drain
Elbow
Tee
Gaskets
Overflow Tube
Coupling
Nuts
Drain
Elbow
Tee
Gaskets
Above-the-Floor
Installations
Through-the-Floor
Installations
Tailpiece
Tailpiece
2. Assemble Drain Elbow and Overflow Tube
- Assemble coupling nuts and tapered gaskets (note proper position
above) on overflow tube and drain elbow.
- For through-the-floor installations, the threaded portion of the tee
points toward the floor. For above-the-floor installations, the
threaded portion of the tee points away from the drain elbow, as
shown above.
- Align parts with the tee in the proper configuration for your
installation. Make sure the drain elbow tube is facing the front of the
bath. Insert tubes completely into the tee and hand tighten the
coupling nuts.
- Tighten the drain elbow securely by inserting a pliers handles into
thetopofthestrainer.Thehandleswillengagethetabsinsidethe
strainer as it is turned into the drain elbow.
- Remove any excess sealant.